Logo

P1105 BMW Fault Code

Check P1105 OBD Fault Code Reason
Description:

Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.

P1105 Code Symptoms :

See P1105 in engine

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1105 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Diagnosis And Repairing P1105

P1105 OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to fix P1105 code ?

See P1105 repair manual
  • Camshaft advance mechanism binding (VCT unit)
  • EVAP system hose leaking
  • Damaged camshaft position (CMP) sensor
  • Fuel injectors may be faulty

BMW Cars that meet P1105 error